top of page

The Lowest Bid Can Become the Most Expensive Mistake: Why Cheap Sealants Cost More in the Long Run

Writer: SEGITIGAMAS JAYA
SEGITIGAMAS JAYA
Oct 29
7 min read

In construction, the cheapest price is not always the best deal. Sometimes, it is the beginning of a much bigger expense.


Everyone likes a good price. Contractors want to stay competitive, developers need to manage budgets, and building owners naturally want to get the most value for their money.


These are sensible business priorities. But there is an important distinction between buying at a lower price and achieving a lower cost.


When it comes to construction sealants and adhesives, choosing a product based solely on its initial purchase price can be a costly mistake. A product that appears economical on day one may require replacement within months, trigger additional labour costs, delay project completion, and create problems that extend far beyond the original invoice.


As the old saying goes, penny wise, pound foolish.


The real question is not how much a product costs when you buy it. It is how much it costs you throughout its service life.


1. The Illusion of Cheap: What Are You Really Paying For?


Not all sealants and adhesives are created equal.


Behind every cartridge lies a formulation: raw materials, chemical ingredients, manufacturing standards, quality control, and performance characteristics that determine how the product behaves once applied.


When a product is offered at an exceptionally low price, it is worth asking an important question: Where has the cost been reduced?


Has the manufacturer improved production efficiency, or is the lower price reflected in the quality of raw materials, formulation, testing, or quality control?


A low price alone does not prove that a product is inferior. However, neither does an attractive label guarantee that a product will deliver the performance your project requires.


The only meaningful comparison is one that considers the product’s technical specifications, suitability for the application, durability, and verified performance over time.


For some low-cost products, the apparent savings can disappear quickly when the material fails to deliver the expected service life. A sealant that cracks, loses adhesion, shrinks, or deteriorates prematurely may need to be removed and reapplied long before the building owner expected.


A cartridge saved at the point of purchase can become an expensive maintenance problem later.


2. The Hidden Cost of Failure: Six Months Today, Another Invoice Tomorrow


Imagine two contractors completing the same project.


Contractor A selects a lower-priced sealant. Contractor B chooses a product based on its suitability, technical performance, and expected durability.


Initially, Contractor A appears to have made the better financial decision.


But what happens if the cheaper product begins to fail after six months or one year, while the correctly specified alternative continues to perform as intended?


The original purchase price is only one part of the calculation.


Premature failure may mean:

  • Replacement materials: Additional cartridges and other repair supplies.

  • Labour costs: Workers must return to remove failed sealant, prepare the surface, and reapply a suitable product.

  • Access and equipment: Scaffolding, lifts, safety equipment, or specialist contractors may be needed again.

  • Project disruption: Repairs can interfere with occupants, business operations, construction schedules, and handovers.

  • Damage beyond the joint: Depending on the application, failed sealing may allow water or moisture ingress, potentially damaging finishes, interiors, or adjacent building components.

  • Reputation and customer confidence: Contractors and developers may face complaints, warranty disputes, and a loss of trust.


These costs can easily outweigh the original difference in material prices.


And there is another important consideration: the first repair may not be the last.


When the same failure repeats, the project pays for the consequences again and again.


The cheapest cartridge is not necessarily the cheapest installation.

The cheapest installation is not necessarily the cheapest building to maintain.


3. The Real Cost Is the Lifecycle Cost


Professional purchasing should look beyond the initial invoice.


Lifecycle cost considers the expenses associated with a product throughout its useful life, including purchase, installation, maintenance, replacement, and the consequences of failure.


Consider this illustrative example.


A project requires 1,000 cartridges of sealant.



Cost component

Lower-priced product

Longer-lasting alternative

Initial price per cartridge

Rp35,000

Rp50,000

Initial material cost

Rp35,000,000

Rp50,000,000

Additional replacement after premature failure

Rp35,000,000

Rp0 assumed

Additional repair labour and access

Rp15,000,000

Rp0 assumed

Illustrative total

Rp85,000,000

Rp50,000,000


Illustration only. These figures are hypothetical, not market quotations or a prediction of actual product performance. The example assumes one full replacement of the lower-priced material, with associated repair costs, and no additional replacement of the alternative during the comparison period.


In this scenario, the lower-priced product ultimately costs Rp35 million more, despite its cheaper initial price.


The lesson is simple: a product that costs more upfront can deliver better overall value when its suitability and durability reduce the need for costly repairs.


Of course, no sealant is immune to failure. Substrate preparation, joint design, application conditions, compatibility, workmanship, and maintenance all matter. The right decision is to select a product that is technically appropriate for the application and to install it according to the manufacturer’s instructions.


Compare the total cost of ownership, not just the price per cartridge.


4. Quality Is Also About Safety, Well-Being, and Peace of Mind


Construction quality is not merely a financial consideration. It affects the people who build, occupy, and maintain our buildings.


Depending on the application, a failed seal can contribute to water ingress, deterioration of building materials, damaged finishes, or repeated exposure to damp conditions. In certain situations, repairs may also require workers to return to difficult-to-access areas, creating additional work and safety considerations.


Product selection should therefore account for more than strength or price alone.

It should consider the relevant technical requirements, including:

  • Adhesion to the intended substrate.

  • Flexibility and movement capability where required.

  • Resistance to the environmental conditions of the application.

  • Compatibility with adjacent materials and coatings.

  • Suitability for interior or exterior use.

  • Relevant product documentation and safety information.


The chemical composition of a sealant also matters. Depending on the formulation, factors such as solvent content, odour, emissions, and handling requirements may be relevant to installers and building occupants.


This is why technical data sheets, safety data sheets, proper application procedures, and manufacturer guidance are essential parts of responsible product selection.


A responsible construction decision protects not only the project budget, but also the people who depend on the quality of the finished work.


Good construction is not simply about building at the lowest cost. It is about building responsibly, reliably, and with confidence.


5. Parabond: A Smarter Approach to Construction Sealants and Adhesives


At PT. Segitiga Mas Jaya, we believe that professional construction deserves products selected for performance, suitability, and long-term value.


That is why we bring Parabond from DL Chemicals, Belgium, to the Indonesian market.


DL Chemicals has been manufacturing sealants and adhesives since 1936, bringing decades of industry experience to the development and production of solutions for professional applications.


Parabond is designed for users who understand that the quality of a construction detail can have consequences long after a project is completed.


For example, Parabond 600 is a hybrid MS polymer adhesive intended for applications specified by its technical documentation. Its suitability should always be assessed against the relevant substrate, joint or bonding requirements, and installation conditions.


Choosing the right product is only the beginning. Correct surface preparation, application, and adherence to technical instructions are equally important in achieving the intended result.


At PT. Segitiga Mas Jaya, our role is to help Indonesian customers access established European products and make informed purchasing decisions based on more than the lowest quotation.


We believe in transparent value, dependable service, and helping customers select products that meet the demands of their projects.


Parabond is not about paying more for the sake of paying more. It is about choosing intelligently for the job at hand.


6. The Lowest Bid Can Carry the Highest Risk


In competitive construction markets, price pressure is unavoidable. Every contractor wants to win projects, every developer wants to manage costs, and every purchasing department has a responsibility to negotiate.


But procurement decisions should not be judged by the initial price alone.


A supplier offering the lowest quotation may appear to deliver an immediate saving. Yet, if the product is unsuitable for the application or fails to meet the required performance standards, the resulting costs can be substantial.


The same invoice can tell two very different stories.


On the day of purchase, the cheaper option looks attractive. Six months later, the maintenance records may tell another story.


That is why experienced professionals look beyond the quotation. They consider product specifications, application requirements, manufacturer support, installation quality, and the consequences of premature failure.


The objective is not to buy the most expensive product available. It is to avoid paying repeatedly for the same job.


The smartest procurement decision is the one that balances price, performance, durability, and risk.


7. Choose Smarter. Build Better.


A building is expected to serve its owners and occupants for years, often decades. The products used in its construction should be selected with that responsibility in mind.


A small saving today may look impressive on a purchasing spreadsheet. But if it leads to premature replacement, repeated labour, disruption, or avoidable damage, that saving may prove to be an illusion.


Before selecting your next sealant or adhesive, ask three questions:

  1. Is this product technically suitable for my application?

  2. What evidence supports its expected performance and durability?

  3. What will the total cost be if it needs to be repaired or replaced prematurely?


These questions can help contractors, developers, architects, and building owners make better-informed decisions and protect the value of their projects.


At PT. Segitiga Mas Jaya, we stand behind a simple principle: quality is not merely what you pay for a product today; it is the value that product delivers over time.


Choose solutions that suit the job. Follow the technical requirements. Think beyond the first invoice.


Choose smarter. Build better. Parabond Extreme Superpowers


Parabond Always a Good Decision.


Parabond by DL Chemicals, Belgium — Professionals’ Partner Since 1936.


Distributed in Indonesia by PT. Segitiga Mas Jaya.

We Care. We Dare. We Deliver.



 
 
 

Comments


©2026 by PT. Segitiga Mas Jaya. All rights reserved.

bottom of page